Why a mist line needs a corner fitting
A misting line that follows a patio edge, pergola post or garden wall rarely runs in one straight line. When the hose reaches a 90-degree turn, forcing it around the bend puts a kink in the line and stresses the connection. The Hoselink Misting System L Joint is a spare part made for exactly this point: it connects to the hose line on either side and extends the misting system around a corner or 90-degree turn without the need for an in-line misting head.
That last detail matters for layout. A corner fitting turns the line; it does not add another misting point. If you want mist at the corner itself, plan for a separate in-line misting head. If you only need the line to continue around the building, the L joint keeps the run clean.
What the L joint is designed to do
- Misting System 'L' Joint: Individual spare part for Hoselink's Misting System, used with the hose line on either side to extend the system around a corner or 90-degree turn. It is a directional connector, not a nozzle, so it belongs in your layout plan wherever the mist line changes direction.

Misting System 'L' Joint - Misting System 'L' Joint: The L joint extends the misting system around a corner without the need for an in-line misting head. You can keep the mist line continuous around a patio corner without adding a misting point you did not plan for.
How to work an L joint into your misting layout
Plan the run before you connect anything. The steps below follow the supplied product description; they do not replace any installation instructions that come with the misting system.
- Sketch the mist line and mark every 90-degree turn: Walk the patio or pergola edge and note where the hose must change direction. Each true corner is a candidate for the L joint.
- Decide whether the corner needs mist or just a turn: The L joint does not include an in-line misting head. If you want mist at the corner, plan a separate head; if not, the L joint alone keeps the line moving.
- Connect the hose line to either side of the L joint: The supplied description says the joint is used with the hose line on either side. Match the line ends to the joint at the corner.
- Check the corner sits at 90 degrees before moving on: The fitting is intended for a corner or 90-degree turn. Test the angle dry before you finalize the rest of the run.
Where an L joint earns its place in an outdoor misting setup
The most common use is a patio perimeter where the mist line follows two walls that meet at a right angle. Instead of looping the hose wide or letting it kink, the L joint takes the line around the building corner and keeps the run close to the structure.
It is equally useful at a pergola post or a garden bed edge where the line needs to turn and continue. Because the joint is an individual spare part, it also lets you replace a damaged corner fitting without buying a whole new misting system. Keep the layout simple: one L joint per 90-degree turn, and a clear note of where you intended mist heads versus where you only needed a direction change.
L joint vs. in-line misting head at a corner
These two parts solve different problems. Choose based on whether the corner needs to produce mist or simply change direction.
- Misting System L Joint: Turns the hose line around a corner or 90-degree turn. Does not add a misting head. Best when the corner is a routing problem, not a misting point.
- In-line misting head: Adds a misting point along the line. Use it where you want mist at the corner itself, and use the L joint separately if the line also needs to turn.
What to check before you buy the corner fitting
Confirm that your misting system is the Hoselink Misting System, because the L joint is listed as an individual spare part for that system. The supplied information does not include hose diameter, thread size or a list of compatible connectors beyond the hose line on either side, so check your existing line ends against the joint before ordering.
Also count your corners honestly. A single 90-degree turn needs one L joint. A run that steps around two corners needs two. Buying one spare is sensible for a layout you may extend later, but the supplied information does not confirm a pack quantity beyond the individual spare part, so order the number of turns you actually have.

