Hardware for Additional Bracket: Classic Series Fit Guide
By Buy Hoselink Products Australia | Garden Watering System ... | Published: 2026-11-04
Category: Guide all'acquisto
Deciding whether to add a second Classic hose reel bracket? Here's what the hardware kit includes, which reels it fits, and how to choose between reusing, relocating, or buying new fittings.
Quick answer
Buy the Hardware for Additional Bracket | Classic Series when you are adding a second Classic wall bracket or moving an existing one and need fresh plugs, screws, and washers. If you are only relocating a bracket and your original fittings are intact, you may not need a new kit.
Why the fittings matter more than the bracket
A wall bracket is only as secure as the plugs and screws holding it. Reusing old fittings after a move, or mixing hardware from a different kit, can leave you with a bracket that loosens under the weight and pull of a full hose reel. The Classic Series kit keeps the mounting components matched to the bracket so you are not guessing at sizes at the hardware store.
When a second bracket makes sense
Adding a second bracket is useful when you want to move the reel between two watering zones, such as a front garden and a back patio, without carrying the whole unit. It also helps if you are relocating the reel to a new house and want a mounting point ready before the reel arrives. The trade-off is that each bracket needs its own secure fixing point, so check that the new wall can take the load before you commit.
Reuse, relocate, or replace: the honest trade-offs
Reusing existing hardware is the cheapest option, but only if the plugs and screws come out cleanly and the wall is undamaged. Relocating a bracket to a new wall usually means new holes and fresh plugs, because old plugs rarely grip a second time. Buying the kit is the straightforward choice when you want the bracket mounted properly the first time and do not want to source matching washers and screws separately.
Decision rules for buying the Classic bracket hardware
- You are adding a second bracket to a new wall: Buy the kit. You need fresh plugs and screws for the new drilling point, and the kit gives you the matched set in one go. Confirm you have a 12mm drill piece before starting.
- You are moving an existing bracket to a new location: Buy the kit if the original plugs cannot be reused or the old holes are damaged. If the original fittings come out intact and the new wall accepts them, you can reuse them. Inspect old plugs for cracking or compression before deciding to reuse.
- You are replacing a lost or mixed set of fittings: Buy the kit rather than matching individual screws and washers at a hardware store. The kit keeps the plug, screw, and washer sizes consistent with the Classic bracket. Check the bracket model is a Classic 3200 series before ordering.
- Your wall is brick, masonry, or a hollow cavity: The supplied plugs suit a drilled hole with a hammered-in plug. If your wall is hollow or requires a different anchor type, check with a qualified installer before using the kit. Do not substitute anchor types without confirming they suit the bracket and load.
Product facts
- Hardware for Additional Bracket | Classic Series: The kit contains four plugs, four screws, and four washers, and requires a 12mm drill piece. Knowing the drill size and contents up front means you can check your toolkit and wall type before the kit arrives, rather than making a second trip for missing pieces.
Hardware for Additional Bracket | Classic Series
Who this kit is for
Best for
- Households adding a second Classic wall bracket for a second watering zone
- Customers relocating a Classic bracket to a new wall who need fresh plugs and screws
- Anyone who has lost or mixed the original bracket fittings
Not for
- Brackets outside the Classic 3200 series, which may need different hardware
- Walls that require chemical or specialty anchors rather than standard plugs
- Customers who only need a replacement bracket body without fittings
