Guides pratiques 2026-11-20 Buy Hoselink Products Australia | Garden Watering System ... 0 vues
Irrigation Kit End Plug: When to Use a 13mm Plug
Learn when and where to use a 13mm end plug in your drip irrigation kit to cap the line, maintain pressure, and prevent leaks.
Irrigation Kit End Plug FAQ
What is a 13mm end plug used for in an irrigation kit?
A 13mm end plug is used to block off the end of a straight run of 13mm poly pipe in a drip irrigation system. It caps the line to prevent water from escaping and to maintain system pressure.
When do I need to use an end plug in my irrigation setup?
You need an end plug whenever you have a straight-line run of 13mm poly pipe that ends at the last emitter or dripper. Without a plug, water will flow out the open end, reducing pressure to the rest of the system.
Which irrigation kits include a 13mm end plug?
The 13mm end plug is included in the Adjustable Drip, Adjustable Spray, and Under Tree Sprinkler Irrigation Kits. If you are building a custom system or extending an existing line, you may need to buy additional end plugs separately.
How do I install a 13mm end plug?
Insert the end plug into the open end of the 13mm poly pipe. Secure it with a 13mm ratchet clamp to prevent leaks. The clamp is essential to hold the plug in place under water pressure.
Do I need extra clamps if I buy additional end plugs?
Yes. While irrigation kits come with enough 13mm ratchet clamps for the included fittings, extra end plugs bought separately will require additional clamps for proper installation.
Key Facts About the 13mm End Plug
Irrigation Kit | 13mm End Plug: Included in the Adjustable Drip, Adjustable Spray and Under Tree Sprinkler Irrigation Kits, the 13mm End Plug is used to block off a straight-line length of irrigation 13mm Poly Pipe. Confirms that this plug is designed specifically for 13mm poly pipe and is a standard component in common irrigation kits.
Irrigation Kit | 13mm End Plug
Irrigation Kit | 13mm End Plug: Secured with a 13mm Ratchet Clamp to prevent leaks. A ratchet clamp is required for a leak-free seal; the plug alone will not hold under pressure.
Irrigation Kit | 13mm End Plug: When running a straight line set up of your irrigation, these End Plugs will be required to cap the system to prevent loss of pressure. Without an end plug, an open-ended line will lose pressure, reducing the performance of drippers and sprinklers.