Zurück zum Blog
Anleitungen 2026-11-20 Buy Hoselink Products Australia | Garden Watering System ... 0 Aufrufe

How to Install a Misting System T Joint for Cooling

How to Install a Misting System T Joint for Cooling

Learn how to add a T joint to your Hoselink misting system to extend cooling coverage in a second direction, with practical setup tips and part requirements.

What the T Joint Does in Your Misting Setup

A misting system T joint is a simple but useful spare part that lets you branch your existing misting line in a second direction. Instead of running a single straight hose, you insert the T joint between two hose ends, and the third outlet points your misting line toward a new area.

This is handy when you want to cool two sides of a patio, reach plants on both sides of a path, or extend coverage around a corner without running a single long loop. The Hoselink Misting System T Joint is designed as an individual spare part, so you add it exactly where you need it.

T Joint at a Glance

  • Misting System 'T' Joint: Individual Spare Part for Hoselink's Misting System. Used with the hose line on each end to extend the misting system in a second direction. This confirms the T joint is a branch piece, not a repair connector. You need it when your cooling setup demands two separate misting lines from one supply.
    Misting System 'T' Joint
    Misting System 'T' Joint

How to Install the T Joint

Before you start, make sure the water supply is turned off and the misting line is depressurized. The T joint fits into standard Hoselink misting hose, so no extra adapters are needed for the connection itself.

  1. Cut or separate the hose where you want the branch: Choose a spot along your existing misting line where you want the new direction to begin. Cut the hose cleanly or separate an existing connection. You will insert the T joint between the two ends.
  2. Attach the T joint to both sides of the cut hose: Push one end of the hose onto one side of the T joint, and the other hose end onto the opposite side. The T joint has three openings: two in line for the main hose, and one perpendicular for the new branch.
  3. Connect the new branch line: Attach a length of misting hose to the third outlet of the T joint. This hose will run to the area you want to cool. You can add misting nozzles, clips, or other fittings along this branch as needed.
  4. Block off the end of the new branch: The supplied evidence notes that you will require a second Misting System Stop Mist Valve to block off the additional line of hose. Without it, water will spray from the open end instead of through the misting nozzles.

A Realistic Note Before You Buy

The T joint only provides the branch connection. It does not include the stop valve needed to seal the end of the new line. Check that you have or order a separate Misting System Stop Mist Valve for each additional branch you create. Also, the T joint is a spare part, so it comes without instructions or additional fittings. Plan your branch length and nozzle placement ahead of time to avoid cutting hose too short.

Verwandte Artikel

Customer Service
Startseite
Produkte
Warenkorb
Profil