Year-Round Greenhouse System Setup Guide

Quick answer

Assemble the sturdy frame on your 9 in 1 Garden Bed, then attach the mesh cover for summer pest protection or the greenhouse cover for cold-weather micro-climate growing.

Setup steps

1. Attach the frame to your garden bed: Insert the frame poles into the pre-drilled holes on the corners of your 9 in 1 Garden Bed. Ensure the frame sits level and is firmly seated to prevent wobbling. If the frame feels loose, check that each pole is fully inserted before tightening.
2. Choose and attach the cover: Select the mesh cover for pest protection in warm weather or the greenhouse cover for cold-weather micro-climate. Drape the cover over the frame, then secure it using the ties provided at each corner. Make sure the cover is evenly spread to avoid sagging and to allow proper ventilation or insulation.
3. Seal the environment with the zipper: Once the cover is tied, close the zipper enclosure to fully seal the raised bed. This step is critical for keeping pests out or retaining warmth. Inspect the zipper track for any fabric caught before zipping to avoid damage.
4. Switch covers as seasons change: To swap covers, unzip and untie the current cover, remove it, then repeat steps 2 and 3 with the other cover. Store the unused cover in a dry place to prolong its life. Always clean and dry the cover before storing to prevent mold or mildew.

Product facts

• Year-round Greenhouse System for 9 in 1 Garden Bed: The system includes a sturdy garden bed frame and two interchangeable covers: a mesh option for pest protection and a greenhouse cover for cold-weather micro-climate. You can extend your growing season by using the greenhouse cover in cooler months and switch to the mesh cover in summer to keep pests away without chemicals.