Install Wall Bracket Lid for Evolve Hose Reel
By Buy Hoselink Products Australia | Garden Watering System ... | Published: 2026-10-22
Category: How-to Guides
Learn how to quickly attach the Evolve Series wall bracket lid to protect your hose reel accessories from weather and debris without taking the reel down.
Quick answer
The Evolve Series wall bracket lid simply snaps onto the existing wall bracket, fully covering the storage compartment to shield accessories from weather and debris. No tools or disassembly required.
Why add the lid?
The wall bracket on your Evolve Hose Reel has an open accessory compartment that can collect dirt, cobwebs, and moisture. Adding the dedicated lid keeps your stored parts clean and dry without affecting the reel's full 180° swivel range. It’s an optional upgrade, but if you keep nozzles, connectors, or spare washer sets inside the bracket, the lid is a simple way to protect them.
What you need
You only need the Evolve Series Wall Bracket Lid (product ID 2551234). No tools, screws, or adhesive are required. The lid is designed to clip directly onto the existing bracket. Ensure your reel is already mounted and the wall bracket is securely fixed before you begin.
Installation steps
- 1. Align the lid with the bracket: Hold the lid so its inner lip faces the open front of the wall bracket. Line up the tabs on the lid with the slots at the top edge of the bracket. Common mistake: trying to attach the lid upside down—the lip should point toward the bracket, not outward.
- 2. Press the lid onto the bracket: Push the lid firmly onto the bracket until you hear or feel it click into place. The lid should sit flush against the bracket face with no gaps. If it feels loose, remove it and reseat the tabs fully. Checkpoint: gently tug the lid downward—if it stays put, it’s locked correctly.
- 3. Test clearance and access: Rotate the hose reel through its full 180° range to confirm the lid clears the wall and reel. Open the lid by pressing the release tab (if equipped) or simply pulling it off—this allows you to retrieve accessories anytime. Common mistake: forgetting to check clearance before first use; a misaligned lid can scrape against the reel arm. After installation, store small spare parts like washers or connectors inside the bracket for easy access.
Product reference
- Wall Bracket Lid | Evolve™ Series: This lid slots onto the Evolve Hose Reel wall bracket without taking the reel down and does not interfere with the 180° swivel. You can add protection at any time—even after the reel is installed—without losing any rotation performance.
Wall Bracket Lid | Evolve™ Series
