How to Replace a Float in an Auto-Fill Pet Bowl

Quick Answer

Replacing the float in your Hoselink Auto-Fill Pet Bowl takes under a minute. Lift the bowl cover, push the new float into place, and click the cover back on.

Step-by-Step Float Replacement

1. 1. Remove the Bowl Cover: Lift the cover straight up from the bowl. It snaps into place, so a gentle upward pull is all that's needed. Set the cover aside. If the cover feels stuck, check for debris around the rim. Do not use tools that could crack the plastic.
2. 2. Install the New Float: Take the new float and push it firmly into the designated slot inside the bowl. Ensure it sits flat and moves freely up and down. A float that doesn't move freely may be installed upside down or obstructed by debris. Remove and reposition if needed.
3. 3. Reattach the Cover: Align the cover over the bowl and press down until it clicks securely into place. Test the bowl by turning on the water supply. If the bowl still doesn't fill properly after replacement, check the water supply line for kinks or blockages.

What You Need

• Float for Auto-Fill Pet Bowl: Replacement floats are available for Hoselink’s Auto-fill Pet Water Bowl. If the float is damaged, the functionality and convenience of this product will be compromised. Using the correct replacement float ensures a proper seal and reliable auto-fill performance, so your pet always has fresh water.